IJ40-0012-29
4127762B/B
11/24/2006
29
Printing postage
3.
PRINTING POSTAGE
3.1
Introduction
In order to achieve the best impression, your WJ 65/95/110
requires an even surface on which to print, therefore on bulky or
uneven items correct folding of the contents will help considerably.
Use a label if in doubt.
It is sometimes unavoidable that your mail will contain staples,
paper clips and other fixings. The machine will accept these, but
it is recommended that the fixings are situated at the bottom of the
envelope. This will avoid the risk of damage to your printing head.
In the event that a satisfactory print cannot be achieved due to bulky
contents (Max.3/8") the envelope should be treated as a packet
and a label used.
It is recommended that the WJ 65/95/110 is left powered on at all
times. This will assist in maintaining print quality. In the event that
you have to power the machine down, first press
to allow the
machine to return to standby mode, then wait for approximately
one minute to allow the ink cartridge to return to the park position
before removing the power.