Hasler WJ 110 Manual Download Page 1

IJ40-0012-1

4127762B/B

11/24/2006

1

WARNING!

Do not under any circumstances attempt to remove the machine
covers or attempt to repair the WJ 65/95/110. There are no
operator serviceable parts thereunder.
The WJ 65/95/110 product is licensed for use under the conditions
of the Post Office. This license is issued subject to the product
being secure at all times. Any removal of covers or dis-assembly
of the product will result in the license being revoked and may result
in the Post Office requesting Hasler to remove the product from
use.
The ink cartridge system used within the WJ 65/95/110 contains
Post Office approved ink. This cartridge should not be tampered
with in any way or the use of non approved inks be undertaken. This
will breach any Post Office licence agreement on the product and
may result in the Post Office requesting Hasler to remove the
product from use.

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commer-
cial environment.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with this
instruction manual, may cause harmful interference to radio com-
munications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.

Summary of Contents for WJ 110












































































































Reviews: