Page 8 of 12
Effective Date: 6 May 2022
Revision: 02
Adjusting Temperature Setpoint (CGS only)
Notes: Setpoint is the only adjustable value on the Main display (Figure 5). To change the setting,
follow the procedure below.
1.
Press
to move the blinking cursor to the value
2.
Press
or
to adjust the value
3.
Press
to move the blinking cursor to the top left corner
Mode Selection
1.
From the main screen, press
to access the mode selection screen (figure 6).
2.
Press
to move the blinking cursor to Mode
3.
Press
or
to change the mode
Figure 6: Mode selection
