HARVEY HPS1600E, Original Instructions Manual, Page: 32 / 62

- 31 -
7. Operations
7.1 Electrical Operations
(Fig.44)
Fig.44
A1,A2 Start button for main blade
—
start the main motor.
B1,B2,B3 Stop button
—
stop all motors
C1,C2 Start button for Scoring blade
—
start the scoring motor
D1,D2 Emergency stop button
—
disconnects power to all motors in the motor cabinet
E Main power switch
—
connect or disconnect the all motor power.
7.2 Safety precautions before operation
The operation of the machine involves a certain amount of hazard for the operator. Before
attempting regular work we recommend you get the feel of operations using scrap lumber to
check settings. Read entire instructions before you start to cut work piece. Always pay attention
to safety precautions to avoid personal injury.
7.3 Crosscutting
1.The crosscut fence can be installed at two positions.
See
Fig.45
Fig.45
Position 1: the operator presses the workpiece against the fence in the cutting direction.
Position 2: the operator pulls the workpiece along the fence against the cutting direction.
2.The crosscut fence can be swung
±
49
°。