Harvest TEC 890A, Owner'S Manual

Page: 9 / 18

9
OPERATION INSTRUCTIONS
1. Once installation and setup is complete the system is ready for baling. There is a GPS
indicator icon that will appear in either of the Automatic or Manual mode screens. The GPS
icon shows the user that the GPS is transmitting data to the PIP to be processed. The GPS
icon, if getting a good satellite signal, will continually increase/decrease in size. While all this
is going on a Yield file is being created and saved to the USB flash drive. Additionally as you
enter the Automatic/Manual mode work screens an alert message will appear above the
Override key. This the alert message will display “ Opening USB flash ” and if the PIP locates
the USB flash drive successfully the alert message will disappear and the yield data will be
written too the flash drive. If a different alert message is being displayed see
pg. 12 for
troubleshooting.
2. Once baling is complete, create a New Job and the yield data file that was written to the USB
flash drive will be complete and ready to be converted. See CONVERTING YIELD DATA
FILE for the next step.
****NOTE : If you’re a first time user, begin with the INSTALLATION OF YIELD DATA FILE
CONVERTER PROGRAM before attempting to convert the yield data file.
GPS
ICON