8
SETUP INSTRUCTIONS
1. Turn the 565 control system on. After a few seconds the Main Menu screen should appear.
Press Setup Mode, the Setup Mode screen will then appear.
2. Press Yield Mapping setup.
a. Yield Mapping Setup should now be displayed.
3. Press the underlined value next to
Swath Width (Ft).
Enter in the swath width that will be
baled, press
Enter
to confirm.
4. Press the underlined value next to
GPS.
Enabling/Disabling will require entering the
appropriate value. 0 to Disable, 1 to Enable. Press
Enter
to confirm.
5.
Make sure the USB flash drive is inserted into the PIP’s Data Transfer port before
baling. Without the USB flash drive a yield file will not be created.
(USB flash drive
provided in the 880 kit)
.
2
4
3
USB flash
drive
Summary of Contents for 890A
Page 16: ...16 NOTES...
