4
Introduction
Thank you for purchasing this 77E Microwave Moisture Sensor Kit. The Microwave Moisture Sensor Kit is
designed to operate through the
baler’s ISOBUS system and/or an Android tablet or Apple iPad (tablet not
included), using the Precision Baling App.
This manual will take you through the steps to install and operate the moisture sensor. Please read this manual
carefully to learn how to operate the equipment correctly. Failure to do so can result in personal injury or
equipment malfunction. If you are unsure about operating the system after consulting this manual, contact your
local authorized dealership for additional assistance or look for the contact information on the back cover of
this manual. If you are in need of parts for the system, please view the Parts Breakdowns in the back of this
manual and contact your local authorized dealer to order the parts.
Tools Needed:
Standard wrench set
Electric drill and bits
Side cutter
Standard nut driver set
Standard socket set
System Requirements for integration into baler display
CNH Balers
The Baler Control Module (BCM)
must have Version 4.2.0.0 or higher.
AGCO Balers
The Baler Processor must have Version 3.3 or higher.
C1000 must have version 3.0.1 or higher
John Deere 330/340 Balers
The Baler must have Software Version 2.0.7 or higher
GreenStar 4
th
Generation Arm Command Display must have version 8.10.2393-23
System Requirements for tablet display
*Requirement to run iPad option are 3
rd
Generation iPad (2012) with
current operating system, plus the Precision Bale App.
*Requirement to run Android option are with
Google Play 5 or greater operating system, plus the Precision Bale App.
Not compatible with Kindle Fire tablet.
