16
Once Dealer Mode has been entered, select the down arrow in the Menu Bar (9) to scroll to the second Dealer
Mode Screen where ‘Moisture’ is a selection.
Once you have reached the second Dealer Mode screen, select the area under ‘Moisture ‘(10). Note that the
box below ‘Moisture’ will likely be the default “NOT INSTALLED”.
Select the proper configuration setting from the pop-up menu (11), based on the configuration of your 77E
system. This configuration setting allows the baler to properly display the information it is receiving from the
77E system on the baler working screen.
Select “DCP.”
10
11
9
