3
Harvest Tec 445Z Installation Table of Contents
PAGE
Introduction
3
Tools Needed
3
Installation of Applicator
4-11
Installation Tank and Saddle
4-5
Installation of Pump Mounting Bracket
6
Installation of Electronic Pump Assembly
7
Installation of Drain/Fill Line
7
Installation of Gauge and Hose Manifold
8
Placement of Spray Nozzle Assembly
8
Installation of Plumbing
9
Installation of Controls and Routing the Wire Harnesses
10
Parts Breakdowns
11-14
Model 445Z Base Kit
11
Model 457 Control Box & Drain / Fill Line
12
445Z Installation Kit
13-14
Warranty Statement
15
Introduction
Thank you for purchasing a Harvest Tec Model 445Z Hay Preservative Applicator. Please read this manual
carefully to ensure correct steps are followed to attach the applicator to the baler. This applicator is designed
to apply Harvest Tec buffered acid. The model 445Z Kit includes the following parts: tank, frame, pump,
gauge, hose, electronic control box, and miscellaneous hardware. If you are unsure about your kit, contact
your local dealer for specifications. For your convenience parts break downs are included in the back of this
manual.
Left and Right sides are determined by facing in the direction of forward travel.
Tools Needed
SAE wrench set
Metric socket set
SAE socket set
Standard screw driver
Hose cutter
Drill bit set
Crescent wrench
Hammer
Center punch
Side cutter
Measuring tape