background image

T

 +44 (0)1709 377172     

F

 +44 (0)1709 377173

E

 [email protected]      

www.harvesthealthcare.co.uk

6

7

GENERAL INFORMATION

GENERAL INFORMATION

GENERAL INFORMATION

Read through this instruction manual conscientiously 

Please note in particular that the various safety instructions must be 
observed

Clean and disinfect the care bed before first use

BEFORE USING THIS BED FOR THE FIRST TIME:

-

Harvest Healthcare care beds bear the CE mark and meet all safety and functionality 
requirements. These care beds were tested according to the international standards which 
contain the safety requirements for medical products. These safety requirements can only 

be met however if the user satisfies himself of the proper state of the care bed (including 

accessories) before using the bed.

Please observe the legislation in your country.

1.1 

EXPLANATION OF THE SYMBOLS USED

This care bed may only be used indoors

This product must be disposed of in a separate refuse collection in the European 
Union. Do not dispose of as normal domestic waste. 

Symbol for direct current.

Symbol for alternating current.

Maximum permissible load.

Maximum patient weight.

Read instructions

IPX4

Read information with this symbol carefully and urgently follow instructions. This 
information is safety-relevant.

This symbol indicates hazards due to electrical voltage. There is mortal danger!

This symbol indicates general hazards. There is danger to life and health.

Conformity mark in accordance with the Medical Device Directive (93/42 EEC).

The electrical equipment is splash-proof. 

Symbol for Protection Class II device, double shock-proof

Symbol for type B device according to DIN EN 60601-1.

1.2 

DEFINITION OF THE GROUPS INVOLVED

OPERATOR

An operator is any person who uses the care bed or on whose instruction it is used (e.g. 
nursing homes, specialised retailers, health insurance companies, medical suppliers).

USERS

Users are persons who, as a result of their vocational training, experience or briefing are 

authorised to operate the care bed or to carry out work on it, or are instructed in handling the 
bed. Furthermore the user can recognise and avoid potential dangers and assess the clinical 
condition of the patient.

PATIENT / OCCUPANT

Persons in need of care, handicapped or infirm and occupying a care bed.

QUALIFIED PERSONNEL 

Qualified personnel are employees of the operator who as a result of their vocational training 
or briefing are entitled to deliver, assemble, disassemble and transport the care bed. In 

addition, these persons are instructed in the cleaning and disinfection regulations for the care 
bed.

Summary of Contents for WOBURN 6

























Reviews: