T
+44 (0)1709 377172
F
+44 (0)1709 377173
E
www.harvesthealthcare.co.uk
36
37
TECHNICAL SPECIFICATION
14.6
TYPE PLATE
Attached to the outside surface of the
mattress base frame. (See Overview)
14.7
INFORMATION ABOUT ELECTROMAGNETIC EMISSIONS
Guidance and manufacturer’s declaration - electromagnetic emissions
The care bed is intended for use in the electromagnetic environment specified below. The customer
or user of the care bed should ensure that it is used in such an environment.
Group 1 -
The care bed uses RF energy only for its internal
functioning. Therefore, its RF emissions are very
low and it is unlikely that nearby electronic devices
will be disturbed.
Class B
The care bed is designed for use in all
establishments including domestic establishments
and those determined to be directly connected to a
public supply network that supplies buildings used
for residential purposes
Class A
EMISSION
COMPLIANCE
ELECTROMAGNETIC ENVIRONMENT
GUIDELINES
RF emissions according to
CISPR11
RF emissions according to
CISPR11
Emissions of harmonics
according to IEC61000-3-2
Emissions of voltage fluctuations /
Flicker according to
IEC 61000-3-3
EMC STATEMENT
