T
+44 (0)1709 377172
F
+44 (0)1709 377173
6
GENERAL
INFORMATION
Harvest 3 is our high end, digital pump designed to provide controlled compressed air to a
pressure care mattress or active seat cushion. The inflated cells within the supplied mattress
provide an alternating pressure surface designed to reduce surface pressure on the skin and
therefore reduce risk of the development of pressure ulcers in susceptable patients.
The Harvest 3 provides the highest air pressure of the Harvest Healthcare pump range
and therefore outputs suitable flow for all use with all Harvest Healthcare active pressure
care mattresses. This includes use with bariatric products, and for occupants with more
complicated clinical needs.
This pump has audible and visual alarms for low pressure, power failure and cycle fault, static
mode and a lock out facility. Extra features include maxi firm mode, seat inflate mode and four
choices of cycle time - 10, 15, 20 and 25 minutes.
Harvest Healthcare supply a pump and mattress but it is the user’s responsibility to ensure
each system meets the guidelines set out in the pump and mattress guide (shown below).
Failure to do this could put the service user at risk. This could prolong the recovery process or
increase the risk of further tissue damage.
For information on our mattress range please refer to the mattress user manuals available on
our website www.harvesthealthcare.co.uk.
GENERAL INFORMATION
Read through this instruction manual conscientiously from start to finish.
Note the safety instructions which must be observed.
BEFORE USING THIS SYSTEM FOR THE FIRST TIME:
-
-
Harvest Healthcare products bear the CE mark and meet all safety and functionality
requirements.
These safety requirements can only be met if the user is satisfied with the proper condition of
the product (including accessories) before use.
Harvest 1
Harvest 2
Harvest 3
Kensington Overlay
Sandringham
Hampton
Windsor
Hampton Extra
Prime Comfort Active
Duke
Duke Extra
Active Mattress and Pump Guide