- 5 -
CHANNEL 9 PRIORITY SWITCH
When this twitch It pushed, channel 9 will be displayed on LED display and set will
operate only on "Emergency Channel 9". N/B: Channel 9 is the national recognised
"Emergency Channel". Use this channel only in cases of emergency.
TRANSMIT LIGHT
This light gives you a visual indication of the transmit mode.
AC-DC SWITCH
This switch selects the power Input source. Slide to AC for 240 Volts 50 Hz
(house current). Slide to DC for 12 Volts .operation.
PA SPEAKER JACK
For attaching optional 8-16 ohm PA speaker. Use 3.5mm jack.
EXTERNAL SPEAKER JACK
You may add any 8-16 ohm external speaker. Simply plug your accessory speaker
into the jack. Inserting the 3.5mm plug will automatically disconnect the Internal speaker.
May also be used for headphones.
DC POWER CORD
To attach unit to positive or negative ground 12 Volts source, a convenient quick
disconnect is provided.
AC POWER CORD
To operate unit from 240 Volts 60 Hz (ordinary house current).
ANTENNA CONNECTOR
A standard SO-239 type connector Is supplied for attaching either mobile or base antennas.
MICROPHONE
The receiver and transmitter are controlled by the push-to-talk switch on the microphone.
To transmit, simply press in this switch. Release the switch to receive. When transmitting,
hold the microphone three to four inches from your mouth and speak clearly at normal
voice levels.
-10
dB ATTENUATION SWITCH
If your antenna is mounted at a height exceeding 7m, you must push this switch to
release into the out position. This will reduce the transmit power.
NOTE: Use of the “-10 dB ATTENUATION SWITCH” is no longer a requirement
for CB Radio use within the UK.
