14
5.3 Set temperature
NOTE:
Turn on the cooling approximately 30 minutes before use.
The cooling capacity is -15 °C from environmental temperature or better.
Turn the
Selection Knob
to move the cursor to
the lowest row.
Press the
Selection Knob
to activate the temperature setting.
Turn the
Selection Knob
to set the desired temperature.
Press the
Selection Knob
to acknowledge. The curser moves to the data field
for cooling on/off selection.
Turn the
Selection Knob
to select cooling on/off.
Press the
Selection Knob
to acknowledge and lock the setting.
Figure 5.3
Setting temperature
5.4 Set first sample and number of samples
Sample collection starts one position after the current position (waste position)
in the cassette magazine.
NOTE:
First collecting fraction will be the position after the cannula location at
the start.
Turn the
Selection Knob
to move the cursor to
the second row.
Press the
Selection Knob
to the position for number of samples.
Turn the
Selection Knob
to select the desired number.
Press the
Selection Knob
to acknowledge and lock the setting.
Figure 5.4
Setting number of samples
