Hartmann Veroval DS 22, Instructions For Use Manual

Page: 15 / 80

English
EN
15
It is essential to extend the scanning
movement to include the temple
and temple area to ensure the
temporal artery is included in the
measurement.
1. Press the SCAN key to switch on the ther-
mometer.
Switch the mode button on the side to .
Ensure the Forehead icon is displayed.
2. Place the sensor head of the device with
forehead attachment on the temple. Hold
the SCAN key down and then slowly and
evenly (taking about 5 seconds) move the
thermometer over the forehead to the
other temple. The „°C“ icon flashes on the
display while taking the temperature.
3. After you have moved the thermometer
over the forehead, release the SCAN key.
The temperature appears and the back-
ground illumination lights up for 5 seconds.
- If the temperature taken is less than 37,6°C,
the fever indicator lights up in green.
- If the temperature taken is 37,6°C or higher,
the fever indicator lights up in red.
If you do not press any key for one minute,
the thermometer switches off automatically.
4. Clean the thermometer tip and the fore-
head attachment after each use. To do so,
use a soft cloth or a cotton bud that can
be moistened with disinfectant, alcohol or
warm water.