4. Tool regulation procedure
After prolonged work period, tool crimping
performance can change slightly due to final
self-adjustment of the tools’ components. This
handtool is equipped with eccentric axle which
allows periodical adjustment of crimping force
and tool recalibration to maintain correct crimp
performance.
1.
Loosen and remove allen head screw (A) using
a 2.5 mm allen wrench. (Fig.6.)
2.
Using a screw driver turn eccentric axle (B) and
toothed adjustment wheel (C) into new position.
dir for enlarging crimping force and reducing
gap between crimping dies
direction – for reducing crimping force and enlarging
gap between crimping dies
3.
Reinstall allen head screw (A) and tighten it.
Fig.6.
5. Maintenance and general remarks
Crimping hand tool K760 is intended to be used
for crimping of Ha-VIS preLink modular plug. Using this
handtool for any other purpose, or for crimping of any
other object, can result in damaging the tool and the
objects being crimped and prevention of its normal further
functioning, for what manufacturer cannot be held
responsible.
Handtool is equipped with full cycle ratchet
mechanism which with optimized leverage system within
the tools make working with these tools easy and simple.
In case of improper crimp, ratchet release mechanism
allows you to easily open the handtool and remove
obstruction before work is continued. Check unblocking
procedure (Fig. 7-9).
Tool itself also incorporates possibility of periodical
adjustment of the crimping force and tool recalibration via
eccentric axle to maintain correct crimp performance.
Check recalibrating procedure (Fig. 6.).
3. Unblocking the tool
IMPORTANT: Apply working force on the tool
handles while unblocking. It will prevent hurting
yourself and possible damages on the tool.
In case of improper crimp, push the ratchet relief (D)
(Fig. 7.) in direction shown to unblock the tool and
remove obstruction before continuing with the work.
With this tool
only
microplugs of
appropriate type
have to
be used. Crimping microplugs of unsuitable type may result
with unsatisfactory characteristics of crimped connections
and eventually with damaging of the tools and is to be strictly
avoided.
Fig. 7
Fig. 8
Fig. 9
part number:
preLink Tool
20 82 000 9901
please read this brochure carefully before
using the tool for the first time
Pushing Performance
