HARTING Ha-VIS RF-R500, Assembly Manual

Page: 23 / 64

15
Ha-VIS RF-R500 - Assembly Manual / Issue 1.0
Operating and Display Elements
English
4. Operating and Display Elements
4.1 Status LEDs
① ② ③ ④ ⑤
RUN Host
Kommunikation
Warning Description
①
② ③
Green Yellow Red
ON OFF ON Boot sequence (ca.10 s) after power on
FLASH OFF OFF Normal Reader operation (without Host
communication)
FLASH BLINKT OFF Reader receives a valid protocol from host
FLASH OFF ON RF Warning [0x84] (without host communication)
FLASH
(alternating)
OFF FLASH
(alternating)
Firmware Activation necessary [0x17] /
Wrong Firmware [0x18
FLASH
(synchronous)
OFF FLASH
(synchronous)
RFC Hardware Error [0xF1]
OFF BLINKT
(synchronous)
FLASH
(synchronous)
Hardware Warning
(ACC EEPROM Error / RFC not detected)
BLINKT OFF FLASH
(fast)
USB Host Error
Firmware Update:
FLASH
(light in
sequence)
FLASH
(light in
sequence)
FLASH
(light in
sequence)
Firmware transfer from host to reader (Please
do not switch off the reader or disconnect the
interface cable)
FLASH
(synchronous)
FLASH
(synchronous)
FLASH
(synchronous)
Firmware flash into EEPROM. (Please do not
switch off the reader or disconnect the interface
cable
Configurations Reset:
FLASH
(light in
sequence)
FLASH
(light in
sequence)
FLASH
(light in
sequence)
While T1 is pushed and hold for maximal 5 s
ON ON ON After T1 has been pushed and hold for 5 s.
Configuration Reset has been finished.
Input / Output LED (yellow) Description
④
Yellow
Configurable LED Can display the status of a digital input or output