HARTING Ha-VIS RF-R500, Assembly Manual

Page: 20 / 64

12
HARTING Electric GmbH
Ha-VIS RF-R500 - Assembly Manual
English
External voltage U
ext
Required external series resistor R
ext
5 V ... 10 V -
11 V ... 15 V 270 Ω
16 V ... 20 V 560 Ω
21 V ... 24 V 820 Ω
Table 11 Required external series resistor R
ext
Note
The input is configured for a maximum input voltage of 5 ... 10 V DC and an input current of
max. 20 mA.
Polarity reversal or overload on the input will destroy it.
3.4 Outputs
3.4.1 Digital Outputs X5
Optocoupler output (X5/1-2):
The transistor connections, collector and emitter, of the optocoupler output are galvanically
isolated from the Reader electronics and are carried to the outside without any internal ancillary
circuitry on terminal X5. The output must therefore be powered by an external power supply.
Figure 13 Optocoupler outputs OUT1-2