HART HPIF01 Operator'S Manual Download Page 2

2 – English

 WARNING! 

READ AND UNDERSTAND ALL  INSTRUCTIONS. 

Failure to follow all  instructions listed below, may result 

in electric shock, fire and/or serious personal injury.

 WARNING! 

When using electric appliances, basic  precautions 
should always be followed,  including the following:

SAVE THESE INSTRUCTIONS
WORK AREA

 

Keep your work area clean and well lit. 

Cluttered 

benches and dark areas invite accidents.

 

Keep bystanders, children, and visitors away while 
operating an inflator. 

Distractions can cause you to lose 

control.

 

Operate inflator in an open area at least 18 in. away 
from any wall or object that could restrict the flow of 
fresh air to ventilation openings.

ELECTRICAL SAFETY

  To reduce the risk of electrical shock, do not put 

inflator in water or other liquid. 

Do not place or store 

appliance where it can fall or be pulled into a tub or sink.

 

Use this product only with batteries and chargers listed 
in tool/appliance/battery pack/charger correlation 
supplement 995000850

.

PERSONAL SAFETY

 

Stay alert, watch what you are doing and use 
common sense when operating an inflator. Do not use 
inflator while tired or under the influence of drugs, 
alcohol, or medication.

 A moment of inattention while 

operating inflator may result in serious personal injury.

 

Dress properly. Do not wear loose clothing or jewelry. 
Contain long hair. Keep your hair, clothing, and gloves 
away from moving parts. 

Loose clothes, jewelry, or long 

hair can be caught in moving parts.

 

Do not overreach. Keep proper footing and balance 
at all times. 

Proper footing and balance enable better 

control of the inflator in unexpected situations.

 

Use safety equipment. Always wear eye protection.

 

Dust mask, non-skid safety shoes, hard hat, or hearing 

protection must be used for appropriate conditions.

 

Eye protection is required to guard against flying 
fasteners and debris which could cause severe eye 
injury.

 

Do not wear loose clothing or jewelry. Contain long 
hair. 

Loose clothes, jewelry, or long hair can be drawn 

into air vents.

 

Do not use on a ladder or unstable support. 

Stable 

footing on a solid surface enables better control of the 

inflator in unexpected situations.

  Do not disassemble the inflator. 

 

Do not operate inflator near flammable liquids or in 
gaseous or explosive atmospheres. 

Internal sparks may 

ignite fumes.

 

Do not store your inflator in a damp or wet location. 
Do not store in locations where the temperature is less 
than 50°F or more than 100°F.

 Do not store in outside 

sheds or in vehicles.

INFLATOR USE AND CARE

 

Check hoses for weak or worn condition before each 
use, making certain all connections are secure. 

Do not 

use if defect is found. Purchase a new hose or notify an 
authorized service center for examination or repair.

 

Release all pressures within the system slowly. 

Dust 

and debris may be harmful.

 

Do not use inflator if switch does not turn it on or off. 

An inflator that cannot be controlled with the switch is

 

dangerous and must be repaired.

 

Place the switch off position before making any 
adjustments, changing accessories, or storing the 
inflator.

  Such  preventive  safety  measures  reduce  the 

risk of starting the inflator accidentally.

 

Store idle inflators out of reach of children and other 
untrained persons. 

Inflators are dangerous in the hands 

of untrained users.

 

Check for misalignment or binding of moving parts, 
breakage of parts, and any other condition that may 
affect the inflator’s operation. If damaged, have the 
inflator serviced before using. 

Many accidents are 

caused by poorly maintained tools.

 

Use only accessories that are recommended by the 
manufacturer for your model.

 Accessories that may be 

suitable for one inflator may create a risk of injury when 
used on another inflator.

 

Keep the inflator and its handle dry, clean and free 
from oil and grease. 

Always  use  a  clean  cloth  when 

cleaning.  Never  use  brake  fluids,  gasoline,  petroleum-
based  products,  or  any  strong  solvents  to  clean  your 
inflator. Following this rule will reduce the risk of loss of 
control and deterioration of the enclosure plastic.

 

 

Never point any inflator toward yourself or others.

 

Keep the exterior of the inflator dry, clean, and free 
from oil and grease.

  Always  use  a  clean  cloth  when 

cleaning.  Never  use  brake  fluids,  gasoline,  petroleum-
based products, or any strong solvents to clean the unit. 

Following this rule will reduce the risk of deterioration of 

the enclosure plastic.

 

Do not exceed the pressure rating of any component 
in the system. 

GENERAL SAFETY RULES

Summary of Contents for HPIF01

























Reviews: