6
2. Basic safety guidelines
2.1 Personnel requirements
Personnel performing installation, commissioning, diagnostics and maintenance
operations shall meet the following requirements:
◆ Trained and qualified professionals shall have qualification to perform specific
operations and tasks
◆ Authorized by the factory/operator
◆ Familiar with alliance / national regulations
◆ Professionals shall read and understand this Operating Instructions,
supplementary documents and certificates before operation.
◆ Follow the operating guidelines and basic conditions
The operator shall meet the following requirements:
◆ Guided and authorized by the company according to mission requirements
◆ Follow the guidelines in this Operating Instructions
2.2 Error description
The manufacturer is not responsible for damage caused by improper use or
non-designated use.
Verifying measurement conditions:
When measuring special fluids and cleaning fluids, the company is pleasant
to help verify the corrosion resistance of fluid connection parts, but do not
guarantee or assume any responsibility.
2.3 Workplace safety
When operating equipment:
◆ Compliance with alliance / national regulations, personnel shall wear protective
equipment.
◆ Turn off the power before wiring the device.
2.4 Operation safety
There is a risk of personal injury!
▲ Operate the equipment only under correct technical conditions and
guaranteed safety conditions.
▲ It is the responsibility of the operator to ensure the equipment is operated
without interference.
Modification of equipment
Unauthorized equipment changes are prohibited, which may result in unforeseen
dangers:
▲ If changes are necessary, please consult our local sales center.
Repair
▲ Ensure operational safety and reliability.
▲ Only devices that are explicitly allowed:
▲ Only use original spare parts and accessories from our company.
Monocrystalline Silicon High Stability Transmitter
