12 – English
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Line will not advance when using
the auto-feed head
Line is welded to itself.
Not enough line on spool.
Line is worn too short.
Line is tangled on spool.
Lubricate with silicone spray.
Install more line. Refer to
Line Replace-
ment
earlier in this manual.
Pull line while pressing button.
Remove line from spool and rewind.
Refer to
Line Replacement
earlier in
this manual.
Grass wraps around boom
housing and string head
Cutting tall grass at ground level.
Cut tall grass from the top down to pre-
vent wrapping.
Motor fails to start when switch
trigger is depressed
Battery is not secure.
Battery is not charged.
To secure the battery pack, make sure
the latches on each side of the battery
pack snap into place.
Charge the battery pack according to the
instructions included with your model.
Summary of Contents for HGHST01
Page 39: ...NOTES NOTAS ...
