background image

1 - English

 

Always remove battery pack from your tool when you 
are assembling parts, making adjustments, cleaning, 
or when not in use. 

Removing battery pack will prevent 

accidental starting that could cause serious personal 
injury.

 

Always remove battery pack before storing the device.

 

When battery becomes fully charged, unplug the 
charger from the power supply and remove the battery 
pack from the charger.

 

Always wear eye protection with side shields marked 
to comply with ANSI Z87.1. 

Failure to do so could result 

in objects being thrown into your eyes and other possible 
serious injuries.

 

Keep battery pack dry, clean, and free from oil and 
grease. 

Always use a clean cloth when cleaning. Never 

use brake fluids, gasoline, petroleum-based products, or 
any solvents to clean battery pack.

 

Do not use a battery pack that is damaged or modified. 

Damaged or modified batteries may exhibit unpredictable 
behavior resulting in fire, explosion or risk of injury.

 

Do not modify or attempt to repair a battery pack that 
has been damaged.

 

Do not expose a battery pack or appliance to fire or 
excessive temperature. 

Exposure to fire or temperature 

above 265°F (130°C) may cause explosion. 

 

Have servicing performed by a qualified repair person 
using only identical replacement parts. 

This will ensure 

that the safety of the product is maintained.

 

Follow all charging instructions and do not charge the 
battery pack or appliance outside of the temperature 
range specified in the instructions. 

Charging improperly 

or at temperatures outside of the specified range may 
damage the battery and increase the risk of fire.

 

Save these instructions. 

Refer to them frequently and 

use them to instruct others who may use this tool. If you 
loan someone this tool, loan them these instructions also.

OPERATION

LITHIUM-ION BATTERY PACKS

Lithium-ion batteries deliver fade free power for their entire 
run time. Lithium-ion tools will not gradually lose power 
due to decreasing battery charge. Instead, power from the 
battery pack will drop from full to zero once the full charge 
has been drained from the battery. Once this happens, 
recharging of the battery is required. It is not necessary to 
drain the battery pack completely before recharging. 

BATTERY PROTECTION FEATURES

Lithium-ion battery packs are designed with features that 
protect the lithium-ion cells and maximize battery life. 
If the tool stops during use, release the trigger to reset and 
resume operation. If the tool still does not work, the battery 
needs to be recharged.

COLD WEATHER OPERATION

The lithium-ion battery pack can be used in temperatures 
down to 14°F. Put the battery pack on a tool and use the 

SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS. 

Failure 

to follow all instructions listed below, may result in electric 
shock, fire and/or serious personal injury.

 

Battery tools do not have to be plugged into an 
electrical outlet; therefore, they are always in operating 
condition. Be aware of possible hazards when not 
using your battery tool or when changing accessories. 

Following this rule will reduce the risk of electric shock, 
fire, or serious personal injury.

 

Do not place battery tools or their batteries near fire 
or heat. 

This will reduce the risk of explosion and possibly 

injury.

 

Do not crush, drop or damage battery pack. Do not 
use a battery pack or charger that has been dropped 
or received a sharp blow. 

A damaged battery is subject 

to explosion. Properly dispose of a dropped or damaged 
battery immediately.

 

Batteries can explode in the presence of a source 
of ignition, such as a pilot light. 

To reduce the risk of 

serious personal injury, never use any cordless product 
in the presence of open flame. An exploded battery can 
propel debris and chemicals. If exposed, flush with water 
immediately.

 

Charge only with HART

  20V battery chargers. Use 

of other chargers may result in personal injury, fire, 
or damage.

 

Do not charge in an area of extreme heat or cold. It 
will work best at normal room temperature. 

To reduce 

the risk of serious personal injury, do not store outside or 
in vehicles.

 

Under extreme usage or temperature conditions, 
battery leakage may occur. If liquid comes in contact 
with your skin, wash immediately with soap and water. 
If liquid gets into your eyes, flush them with clean water 
for at least 10 minutes, then seek immediate medical 
attention. 

Following this rule will reduce the risk of serious 

personal injury.

 

When battery pack is not in use, keep it away from 
other metal objects like: paper clips, coins, keys, nails, 
screws, or other small metal objects that can make a 
connection from one terminal to another. 

Shorting the 

battery terminals together may cause sparks, burns, or a 
fire.

To register your HART

  

product, please visit:  

https://HARTtools.com/register
Use this battery pack for HART

 

20V cordless products 

only. Refer to the Operator’s Manual provided with product. 
Always mention the model number above when communi-
cating with us regarding this battery pack.

BPH003 20V

4.0Ah Li-ion Battery Pack 

Summary of Contents for BPH003 20V









Reviews: