Introduction
Safety
Tools
Part Identification
Thank you very much for purchasing this Harrod Horticultural Decorative Domed
Fruit Cage.
To install your cage safely we recommend that you enlist the help of three or more
people. Take extra care when working on step ladders on soft ground.
1 x soft rubber mallet, 1 x 8mm spanner, 2 x 13mm spanners, 1 x 17mm spanner, 1 x 5m
tape measure, 1 x pair of scissors, 1 x ball of string, 1 x spirit level, 1 x hole former (ARC-
021)
Before constructing the fruit cage remove all protective packaging and check that all
parts listed in the pack contents list (CHK811) are present. Use the part identification
diagram on the opposite page to help you recognise the parts. You will have varying
quantities of cage parts depending on the number of units combined to make up your
specific arrangement. Each door kit, of which you will have at least one, comprises of
the parts list in the table below left.
(Optional)
PAGE 2
DOMED FRUIT CAGE ASSEMBLY INSTRUCTIONS
HEAVY-DUTY STEEL DOOR
KIT IDENTIFICATION (GDN105)
REF NO
Part Description
PART No.
1:
2 x 0.7m Horizontal Support
PGG117
2:
1 x Diagonal Support
PGG007
3:
2 x 1.9m Vertical Supports
PGG006
4:
1 x 2.3m Door Support Upright
PGG112
DOMED FRUIT CAGE
PARTS IDENTIFICATION
(GFC-130 & GFC132)
REF No
PART DESCRIPTION
PART No
13:
2.5m Horizontal Support
PGG035
14:
Three-Way Connector
GDN-675
15:
Four Way Connector
GDN-679
16:
Five Way Connector
GDN-678
17:
Dome Fruit Cage Finial (option 1) PGG055
18:
Top Corner Plate
PGG046
19:
2 Way Connector plate
PGG012
21:
Hex Bolt M10 x 20mm
BOL342
22:
M10 Washer
BOL712
23:
Dome Curved Roof Support
PGG041
24:
Ground Peg
GPP001
25:
Net Clip
GPP005
26:
Net Tie
GAR914
4 :
2.3m Support Upright
PGG112
NA
2m Wide Standard Sid Netting
GAR070
NA
Fitted Roof Net
GDN-087
NA
Whipping Twine
TWN-294
NA
Whipping Needle
TWN-295
27:
Cast Decorative Finial (Option 2) PGG022
20:
4 Way Connector plate
PGG013
12:
4 x Foot Plate And Clamp
GDN-108
HEAVY-DUTY STEEL DOOR
ASSEMBLY PACK (GDN116)
REF NO
Part Description
PART No.
5:
4 x Two-Way Connector
GDN-676
6:
1 x T-Joint
PGG005
7:
1 x Catch and Fixings
GDN-809
8:
2 x Hinge and Fixings
GDN-808
9:
2 x Hex Bolts M8 x 45mm
GPP510
10:
4 x Plastic Washers M8
GPP710
11:
2 x Nylock Nuts M8
GPP500
12:
1 x Foot Plate and Clamp
GDN-108
Note:
A 3mm allen key is provided
with GDN-809 for assembly of GDN-809
and GDN-808
