HARRISTON INDUSTRIES 4240 CLOD HOPPER Operator'S Manual Download Page 74

Page: 74 / 84

Fig. 52 blower drive belt (typical)

Fig. 53 pulley alignment

5.2.5 blower drive belt tenSion & alignment

A set of V belts transmits rotational power to the op-

tional blower behind the Ellis Table. They must be

kept properly tensioned and the pulleys aligned to

obtain the expected performance and life.

To check the tension and alignment, follow this pro-

cedure:

1. Clear the area of bystanders, especially small

children.

2. Lock-Out Tag-Out power supply before starting.

3. The belt should not slip during operation.

4. If the belts slip during operation, adjust the belt

tension by following this procedure:

a. Set the tension on the drive belts by moving

the blower frame.

b. Loosen blower position jam nut and move

frame.

c. Tighten blower frame position bolt and jam

nut.

d. Use the motor mounting bolts to move the

motor for setting the belt tension if the blower

frame angle can't be changed.

e. Tighten motor mount anchor bolts to their

specified torque.

5. Lay a straight edge across the pulley faces to

check alignment. Adjust pulley alignment if pulley

faces vary by more than 1/32 inch (0.7 mm).

machine is shown with guards re-

moved or opened for illustrative

purposes only. do not operate with

guards removed or opened.

warning

Summary of Contents for 4240 CLOD HOPPER





















































































Search results

Summary of Contents for 4240 CLOD HOPPER

Reviews:

HARRISTON INDUSTRIES 4240 CLOD HOPPER, Operator'S Manual, Page: 74 / 84

Search results

Summary of Contents for 4240 CLOD HOPPER

Reviews: