HARRISTON INDUSTRIES 4240 CLOD HOPPER Operator'S Manual Download Page 36

Page: 36 / 84

FIG. 5 AUXILIARY EQUIPMENT

FIG. 4 RED REMOTE STOP SWITCH (TYPICAL)

Right Side

Right Rear Camera

Remote Stop Switch (Fig. 4):

The machine is designed with a stop switch on the

opposite side of the frame and right rear corner

to allow personnel standing next to the trash con-

veyor to stop the machine. Push the switch IN to

stop the machine. The switch must be OUT before

the unit can be started. Turn the switch clockwise

to release it and it will pop out.

Auxiliary Equipment:

Each customer must provide a means of bringing

a flow of potatoes to the loading end and removing

them from the discharge end plus removing the

trash. Normally this is done by another piece of

equipment such as another conveyor. Always con-

nect the adjacent equipment securely to the hop-

per or conveyor to prevent movement.

Summary of Contents for 4240 CLOD HOPPER





















































































Search results

Summary of Contents for 4240 CLOD HOPPER

Reviews:

HARRISTON INDUSTRIES 4240 CLOD HOPPER, Operator'S Manual, Page: 36 / 84

Search results

Summary of Contents for 4240 CLOD HOPPER

Reviews: