Harris Unity XG-100P, Operation Manual

Page: 19 / 135

19
XG-100
BASIC OPERATIONS
3
Table 1. XG-100P Controls, Indicators, and Connectors
Key Control/Indicator Function
1 Channel Knob Used to select one of 16 channels
2 Power/Volume Knob Turn clockwise to power on radio and increase volume of
audio heard in speaker.
3 Encryption Switch Selects between encrypted and unencrypted operation.
Ø - Encryption
O - No Encryption
4 Microphone (Rear) Used with microphone on the front of the radio to form a
dual microphone system that is used for noise cancellation.
Noise cancellation improves the quality of transmitted
voice.
5 Bank Selector Used to select one of three banks: A, B, or C ( Select
Channel Bank ).
6 Programmable Hot
Key
Used to select a commonly used function as an alternative
to navigating menus. This is configured in the
Communications Planning Application (CPA).
7 Push-To-Talk (PTT)
Button
Press to transmit. Make sure PTT is enabled.
8 Programmable
Buttons
Used to select a commonly used function as an alternative
to navigating menus. These are configured in the CPA.
9 Battery Battery - Refer to Assemble the Radio for battery
connection and removal.
10 Antenna Connector Provides Subminiature version A (SMA) antenna
connector.
11 Emergency Button Used to place radio in emergency mode ( Emergency
Operation ). This button can be disabled by setting to
unassigned in the CPA.
12 Indicator Light
Emitting Diode
(LED)
Indicates radio status.
Red = actively transmitting.
Green = actively receiving.
13 Top Display Top display shows summary of status such as channel,
battery, and scanning. This can be configured for viewing
from the front or rear of the radio ( Display Settings ).
14 Speaker Radio speaker which can be muted ( Audio Settings ).
Volume can be adjusted using the Power/Volume knob.
15 Microphone Used with microphone on the rear of the radio to form a
dual microphone system that is used for noise cancellation.
Noise cancellation improves the quality of transmitted
voice.