Harris Unity XG-100P Operation Manual Download Page 134

Page: 134 / 135

installed, used, maintained or repaired, or, (v) has been subjected to any other

kind of misuse or detrimental exposure, or has been involved in an accident.

The preceding paragraphs set forth the exclusive remedies for claims based

upon defects in or nonconformity of the Equipment, whether the claim is in

contract, warranty, tort (including negligence), strict liability or otherwise, and

however instituted. Upon the expiration of the warranty period, all such liability

shall terminate. The foregoing warranties are exclusive and in lieu of all other

warranties, whether oral, written, expressed, implied or statutory. NO

IMPLIED OR STATUTORY WARRANTIES OF MERCHANTABILITY OR

FITNESS FOR PARTICULAR PURPOSE SHALL APPLY. IN NO EVENT

SHALL THE SELLER BE LIABLE FOR ANY INCIDENTAL,

CONSEQUENTIAL, SPECIAL, INDIRECT OR EXEMPLARY DAMAGES.

This warranty applies only within the United States.

Harris Corporation

RF Communications Division

221 Jefferson Ridge Parkway

1680 University Avenue

Lynchburg, VA 24501

Rochester, NY 14610

1-800-528-7711

1-585-244-5830

Summary of Contents for Unity XG-100P








































































































































Search results

Summary of Contents for Unity XG-100P

Reviews:

Related manuals for Unity XG-100P

Brands by name

Popular brands

Harris Unity XG-100P, Operation Manual

Search results

Summary of Contents for Unity XG-100P

Reviews:

Related manuals for Unity XG-100P

Brands by name

Popular brands