AMPL. Menu
The AMPLIFIER menu serves to control crucial settings for the amplifier.
Parameter
Remark
AMPLIFIER MODE
Selection of the amplifier mode (auto / on
/ off / service)
- AUTO: amplifier is on if input signal is
present / standard operation
- OFF: amplifier is off
- ON: amplifier is on, if there is no error
- SERVICE: amplifier is on (reserved for
trained staff)
AMPLIFIER STATE
Indication of operating state of the
amplifier (on / off)
POWER-OFF DELAY TIME
Input of the delay time in s. When the
input signal is missing, the power
amplifier is switched off according to the
set delay time (in the AUTO-mode)
ACTUAL DELAY TIME
Indication of the delay time elapsed so far
in s
REFLECTION HANDLING
- RED. TO POWER-OFF
- POW. OFF TO RETRY ON
- MAX. REFL. COUNTER
- CLEAR TIME FOR COUNTER
- CLEAR ACTUALS
Press the ENTER key to open the
reflection handling menu (defines how the
transmitter reacts to reflections) - see the
operating manual of the transmitter,
section "Maintenance/Reflection
handling", for further information.
WARNING HANDLING
- RED. TO POWER OFF
- POWER OFF TO RETRY ON
- MAX. WARNING COUNTER
- CLR. TIME FOR COUNTER
- CLEAR ACTUALS
Press the ENTER key to open the
warning handling menu. In the warning
handling menu the response of the
TV-transmitter to incoming warnings of
additional amplifiers can be defined.
Operator manual
2 - 34
TVS-D 660 LC-Display
Menu Operation
Summary of Contents for TVS-D 660
