VISION UNIT Menu
In the VISION UNIT menu the following parameters are permanently displayed:
Parameter
Remark
INPUT
Indication of the Main / Aux video input
on the rear-panel / terminal board
VF SIG.
Indication of the availability of the VF
signal (Smiley / Weepy)
INPUT DEV.
Deviation in dB from the nominal level
(there are different criteria for the level
control - see VF gain control mode)
WHITE
Indication of the white level in mV
SYN. LEV.
Indication of the sync level in mV
RES. CAR.
Indication of the residual carrier in %
VF
Indication of the VF control mode
(manual gain control MGC, automatic
gain control AGC)
Operator manual
2 - 20
TVS-D 660 LC-Display
Menu Operation
Summary of Contents for TVS-D 660
