Harris NEXIO AMP NX3801HDX, Hardware Installation And User'S Manual

Page: 61 / 140

NEXIO AMP
Hardware Installation and User Guide
51
©2011 Harris Corporation. All rights reserved.
Startup Operations
Once NEXIO AMP is successfully started, complete the following startup operations
to ensure the NEXIO AMP is operating properly:

Registering Your Software on page 51

Confirming Connection to Additional Systems on page 56

Verifying Audio and Video I/O Connections on page 57

Testing Input and Output Signals on page 57
Registering
Your
Software
Your software must be registered. Typically this gets done during the
commissioning process. If your software does not get registered during the
commissioning process, you can register your software. To register your software
you will need to send Harris BCD Support the deployment file (.dc file) for the
particular software and/or channels that you want to register. The .dc file is a
unique encrypted file for each server. Therefore you must make sure that you name
each server with a unique name for easy identification.
The following procedure describes how to create the deployment (.dc) file that you
need to send to Harris BCD Support. This information can also be found on the
Software Registration Card provided with your server.
If you have any questions about registering your software, contact BCD Technical
Support (see
Technical Support on page 6).