Harris NEXIO AMP NX3801HDX Hardware Installation And User'S Manual Download Page 16

Page: 16 / 140

About This Guide

You can supply your own packaging as long as it meets the following criteria:



The packaging must be able to withstand the product’s weight.



The product must be held rigid within the package.



There must be at least 2 in. (5 cm) of space between the product and the
container.



The corners of the product must be protected.

If the product is still within the warranty period, Harris Corporation will return it to
you by prepaid ground shipping after servicing.

Technical Support

Technical support is available 24 hours a day, 7 days a week. You can contact
technical support by phone or e-mail.

Harris Broadcast Communications Division (BCD) Support



Call

: 1-416-445-4032



Toll Free:

+1-888-534-8246



Email:

[email protected]



Website

http://support.broadcast.harris.com

Video Server Division



Email:

[email protected]



Website

http://www.broadcast.harris.com/productsandsolutions/Servers/

U.S., Canada, Central America, and Latin America (CALA)

Video Processing, Distribution, Servers, Storage, News, Inscriber and Videotek



Call:

1-888-534-8246



Fax:

1-416-445-9020



Email:

[email protected]

Summary of Contents for NEXIO AMP NX3801HDX









































































































































Search results

Summary of Contents for NEXIO AMP NX3801HDX

Reviews:

Related manuals for NEXIO AMP NX3801HDX

Brands by name

Popular brands

Harris NEXIO AMP NX3801HDX, Hardware Installation And User'S Manual

Search results

Summary of Contents for NEXIO AMP NX3801HDX

Reviews:

Related manuals for NEXIO AMP NX3801HDX

Brands by name

Popular brands