Harris InfoCaster R2100, Hardware Installation Manual

Page: 67 / 88

47 Chapter 2 | Installation and Setup
InfoCaster R2100 Hardware Installation Manual
RunningSenseControlCode Sequence of hexadecimal
values Passed to plasma display; queries the
state of the plasma display (ON or
OFF).
RunningSenseACK
(Some displays respond to
RunningSenseControlCode by
sending the RunningSenseON or
RunningSenseOFF code instead of
the RunningSenseACK code. For
these displays, enter the same
sequence for RunningSenseACK
and RunningSenseON)
Sequence of hexadecimal
values Specifies the expected return code
from the plasma display upon
successful receipt of
RunningSenseControlCode.
RunningSenseON
(Some displays respond to
RunningSenseControlCode by
sending the RunningSenseON or
RunningSenseOFF code instead of
the RunningSenseACK code. For
these displays, enter the same
sequence for RunningSenseACK
and RunningSenseON)
Sequence of hexadecimal
values Specifies the expected return code, if
the display is ON, from the plasma
display upon successful receipt of the
GET command requesting the
RunningSenseON or
RunningSenseOFF code. (InfoCaster
sends the GET command after it
receives the RunningSenseACK code.)
If InfoCaster fails to receive the
RunningSenseON code, it assumes
that the display is OFF.
TurnONControlCode Sequence of hexadecimal
values Passed to plasma display; specifies
the turn ON control code.
TurnONACK Sequence of hexadecimal
values Specifies the expected return code
from the plasma display upon
successful receipt of
TurnONControlCode.
TurnOFFControlCode Sequence of hexadecimal
values Passed to plasma display; specifies
the turn OFF control code.
Table 2-6: Display Element Sub-element Descriptions (Continued)
Tag Name Data Type Description