Harris InfoCaster R2100, Hardware Installation Manual

Page: 58 / 88

38 Chapter 2 | Installation and Setup
InfoCaster R2100 Hardware Installation Manual
Note:
When using the VGA Out option, the Video Standard drop-down list
does not appear. Set your video standard for VGA Output as described
in
”Configure VGA Output” on page 38 .
Configure VGA
Output
After you have set up the ATI boards(s) in your system, you need to configure
the VGA output.
1 Select Start > Programs > Harris > InfoCaster > Configuration Utilities >
InfoCaster Configuration Utility.
2 Switch to the Video/Audio Standard tab and select VGA Out from the
Select Output Device drop-down list.
Figure 2-26. VGA Output Setup
3 Set the Video Standard and Rotation for the card.
4 Click the Update button to finalize the settings.
5 Use the Add and Remove buttons to set the heads provided by the board.
If you have the Multi Head option you can run multiple instances of
InfoCaster on your system with each one displaying output on a different
card head.
InfoCaster and Network Manager consider each head to be an instance.
Each head can display separate InfoCasts, and heads can be combined
together to span InfoCasts across multiple monitors.
Note:
Any time you change the settings of a card, click the Update button
to finalize the changes.
6 If you want to be able to edit InfoCasts and control output locally on this
system, select the head you want to want to use for editing, and select the
Set This Head as Windows Desktop checkbox.
7 Click OK to save these settings.