15
Normal Operation
Once you have completed the start
-
up procedure, your fire is ready to resume its normal
operation.
The fire is designed to take 2 pieces of wood approximately 300mm long and about 1.5kg each
(total load of 3kg).
Your appliance should be reloaded when the previous load has burned down to red embers.
The Ferva Saturn is design to be reloaded in a similar way to traditional fires, simply open the door,
place the logs in an appropriate position and close the door.
The action of the door handle will release the by pass damper when opened and close it when the
door is fully closed, so no additional operation is required for this feature.
Once the logs are in place and the door is shut, you are free to adjust the main air control to run
the fire on either a high or low setting.
Important:
firewood should be loaded in a sideways direction when operating this appliance.
The door must be closed at all times during the operation, except during the light up
procedure, refuelling and occasional poking of the fire when necessary. Ensure door
seals are maintained in good condition.
Summary of Contents for FERVA SATURN
