14
DHSD / DHSE6800
+
Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 2: Installation
Setting Jumpers
The DHSD / DHSE6800
+
module has two standard jumpers. Follow
this procedure to set the
jumper for the proper serial digital video signal:
1. Locate jumper set P1 on the module.
shows the standard
location of the jumper set.
Figure 2-1.
Locations of the Jumper Sets and LEDs
Note
You need to configure modules
for local or remote operation
before
power-up. To change the
configuration, first remove
power from the module, reset
the jumper, and then reapply
power.
Status
indicator
Reclock
status
LEDs
P1 jumper
P2/P3 jumpers
(used by DHSE6800 only)
+
Summary of Contents for DHSD6800+
Page 2: ......
