FMP-112968-001
Page 3 of 6
5.
To access the radio modem board inside the radio, carefully remove
the top three and rear three cover screws. Set them aside.
6.
Remove the remaining six side screws (three on each side) and set
them aside.
7.
Remove the cover from the radio and set it aside.
8.
Remove the existing T1/E1 modem board jumpers. Refer to
“Aurora 2400 Jumper Locations” or “Aurora 5800 Jumper
Locations”.
Aurora 2400 Jumper Locations
1.
Remove the two jumpers in the P4, P5 strapping block. (Refer to
Figure 1 and Table 1.)
Figure 1
Jumpers (Aurora 5800 shown; Aurora 2400 is similar)
P4
P5
Table 1
Modem strap installation for P4 and P5 (Aurora 2400)
Configuration
P4
P5
T1
1
1
