FMP-112968-001
Page 2 of 6
Customer Service will convert your existing Product Code number to
reflect the new configuration (now 10Base-T or T1/E1) and send the
new labels to you.
When you receive the new label, apply it to the back of the radio.
Customer
Service
Contact Information
Tools Required
• Phillips screwdriver
• Scotch tape
Materials
Provided
Contents of kit 098-112968-001:
(1)
Modification InstructionsFMP-112968-001
(2)
Screws, SEMS/PHIL, 4-40 x 3/16002-135024-306
(1)
10Base-T Bridge021-112835-001
(2)
Jumpers037-020015-357
Procedure
Removing the Jumpers
1.
Turn the Aurora radio off using the power switch.
2.
Remove the fuse and set it aside.
3.
Disconnect the Data, Antenna, and Power connections.
4.
If the radio is rack-mounted, remove it from the rack. Place the
radio on a flat, clean, static-free work surface.
USA OFFICE
TEL 1-800-227-8332
(+1) 650-594-3800
FAX 1-650-594-3621
CANADA OFFICE
TEL 1-800-465-4654
(+1) 514-421-8333
FAX 1-514-685-4580
The parts in one kit convert one Aurora transceiver radio to or
from T1/E1-10Base-T. To convert both ends of a radio hop, two
kits are required.
