Harris AES-3981, Installation And Operation Manual, Page: 50 / 56

38 AES-3981 Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Appendix A: Tree View Navigation
Navigating the Tree View
To navigate and then view or change a parameter from the Tree View,
follow these steps:
1. Open the front panel of the NEO frame.
2. Press any card edge control button or the toggle switch to turn on
the VFD display.
The message
AES-3981 will appear as the banner on the card-edge
display screen.
3. Press the Select button.
The first two items in the Level One list will appear.
4. Click Nav- (down) on the Nav-/Nav+ switch to view more items in
the list.
5. Choose the desired item in the list, then press the Select button.
The Level Two list will appear.
6. Repeat steps 4 and 5 to view more items in Levels Two, Three, and
Four.
7. If the parameter is numeric, slide the bar to the desired parameter
using the Nav+/Nav- switch.
OR
Choose the desired item in the Level Four list, then press the
Select
button.
8. Once the Level Four parameter is set or viewed, you can leave the
parameter in its current state, or return to the banner. To return to
the card-edge display banner, repeatedly press the
Escape button.
9. Close the front panel again after you have completed the procedure
to prevent the frame from overheating.
Note
If you do not wish to make
changes to your settings, return
to the previously selected item
in the list, then press
Escape to
move up a level.
Note
After several seconds of
inactivity, a scrolling message
will appear, describing the
purpose of the currently selected
parameter.