Harper TURBO VAC 60R, Operator'S Manual

Page: 27 / 64

R
R
Turbo Vac TV60R
Edge Brush
• A fence brush kit (Part no. 900216) is
available for cleaning areas along
fences and curbs, etc., that are difficult
to reach with the Turbo Vac broom.
• The fence brush can be adjusted verti-
cally and horizontally, as well as ro-
tated at an angle, so that debris is
thrown into the Turbo Vac broom. For
best results, angle the front edge of
the brush downward.
• The stop chain is used to adjust the
height of the fence brush during
operation and to hold it up during
transport.
• Never allow the brush to rest com-
pletely on the ground during operation.
SAFETY WARNING!
The Turbo Vac should never be trans-
ported with the fence brush in operating
position. Always use the stop chain to
suspend the brush during transport.
Dual Spacer Kit
• For soft terrain, a dual spacer kit is
available for the Turbo Vac.
• The kit includes the spacers shown in
the photograph below, two turf tires
and all the fasteners for installation
(Part no. 905080).
• Use torque values from the Standard
Torque Chart (see page 22) when
tightening nuts and bolts.
SAFETY WARNING!
The Turbo Vac should not be towed at
highway speeds when the dual wheels
are attached.
The Turbo Vac does not meet highway
safety codes.
Contact your Harper Dealer for more
information about optional equipment,
or see the Harper Industries website at:
www.harperindustries.com
Optional Equipment
25