Harper TURBO VAC 60R, Operator'S Manual

Page: 18 / 64

R
R
Turbo Vac TV60R
TV60RH Hydraulic Controls
• The hydraulic flow control and pressure
relief are set at the factory, and should
not require adjustment.
• If desired, oil flow can be redirected
from the broom to the blower, or vise-
versa, by loosening the knob and mov-
ing the adjustment lever of the flow
control. This action will speed up or
slow down these components in an in-
verse fashion.
Level Hook-Up
• For the Turbo Vac to work properly, the
frame needs to be level with the ground.
• The tongue can be moved up or down
depending on which set of holes on the
frame are used.
• The hitches on different tow vehicles
vary in height, so there are adjust -
ments on the hitch and the tongue to
keep the Turbo Vac level.
Broom Height
• The broom height should be adjusted
so that the broom barely touches the
grass.
• Broom height is easily adjusted tight-
ening or loosening the nuts on the
broom height adjustment.
• Make sure that both broom wheels (one
per side of unit) are adjusted the same
so the broom stays level.
• Brooms are originally 17” in diameter.
• When the broom wears down to 15” the
adjustment will not lower the broom
enough for it to perform adequately and
the broom needs to be replaced.
Adjustments
POSSIBLE
HITCH
MOUNTING
LOCATIONS
16