Harper Turbo vac 30, Operators Manual And Parts Lists, Page: 13 / 93

TV 30
R
Grease Zerk Locations
PROCEDURE
1) Park on level ground and set park
brake.
2) Lower broom to the ground.
3) Turn off TurboVac.
4) Give 2 to 3 shots of grease after every
10 hours of use.
Air Cleaner
• Make sure intake is always free of
debris.
• When engine is turned off, loosen
clamps on air cleaner to access pri-
mary and secondary elements.
• Replace both elements according to
the Maintenance Schedule.
Left Side Right Side
Front Pivot*
Roller (L)
Deck Lift (L)
Broom (L)
Broom (R)
Deck Lift (R)
Roller (R)
Front Pivot*
Front Axle (L)
* same zerk
Front Axle (R)
Front Pivot Zerk
Front Axle Zerks
Air Intake
Clamps (3)
Primary Element
Secondary Element
11