TV 30
R
Equipment & Controls
•
Read and understand this manual.
•
Altering this equipment in any manner
which adversely affects its operation,
performance, durability, or use will void
the warranty and may cause hazard-
ous conditions.
•
Know the location and function of all
controls and how to stop this equip-
ment quickly in an emergency before
you operate the equipment.
•
Keep all nuts, bolts and screws tight to
help ensure safe operation of this
equipment.
•
Use genuine factory parts or parts with
equivalent characteristics, including
type, strength and material. Failure to
do so may result in product malfunc-
tion and possible injury to the operator
and/or others.
•
If hardware is not secure, or if some of
the hardware is over-tightened, equi-
pment failure may result, posing pos-
sible safety hazards.
•
To prevent possible eye injury, always
wear SAFETY GLASSES while oper-
ating equipment.
Safety Decals
•
If safety related or instructional decals
become illegible or are removed, re-
place them immediately. New decals
may be obtained from your local Harp-
er Dealer.
•
If you replace parts that have such
decals attached to them, make sure
the decals are replaced with current
versions, and are on the replacement
parts before the machine is operated
again.
Diesel Fuel
•
Always use an approved container for
transporting diesel fuel.
•
Do not allow open flames or sparks
while performing maintenance or refu-
eling.
•
Never remove fuel tank cap or add
fuel when engine is running or while it
is hot.
•
Only use ultra low sulfer diesel.
•
Never fill fuel tank indoors. Fumes are
heavy and will sink to the lowest point,
collect and become hazardous.
•
Wipe up spilled fuel immediately.
•
Do not store fuel in a room with an ap-
pliance that has a gas pilot or electri-
cal switch that may cause sparks.
•
Always store diesel outside in a safe-
ty can (a can with flame arrestor and
pressure relief valve in pour spout).
•
Never store the equipment with fuel in
the tank inside a building where fumes
may reach an open flame or spark.
•
Allow the engine to cool before storing
in any enclosure.
•
Be certain to provide adequate ventila-
tion if an engine must be run indoors -
exhaust fumes are dangerous.
SAFETY WARNING!
Diesel fuel is extremely flammable and can
be highly explosive.
Guards & Shields
•
Keep all safety devices in place.
•
Replace all worn, damaged, unusable,
missing or lost safety shields and
guards before operating the equip-
ment.
•
Keep the equipment in good operating
condition.
Safety Guidelines
8
Summary of Contents for Turbo vac 30
