Spike Bed
9
Hydraulic System
•
High heat, 190° or greater, can be
damaging to the hydraulic system.
Check various parts of the system to
make sure there are no “hot spots”
which may indicate a problem.
•
In the off season, run the bed at least
twice a month to prevent valve
condensation.
Hydraulic Hose Connections
•
Taped 1/4” hose (rod end) connects to
C1.
•
Un-taped 1/4” hose (base end)
connects to C2.
Hydraulics
Wiring Instructions/Corded Remote Spike
Bed
•
See parts page 1.4 for more detail.
•
White wire attaches to the yellow coil
wire.
•
Green wire attaches to the actuator on
motor start solenoid.
•
Black wire attaches to the input on
motor start solenoid.
White wire attaches to yellow coil wire.
Green wire attaches to actuator on motor
start solenoid.
Black wire attaches to input on motor start
solenoid.
Corded/Wireless Remotes
Rod End
Base End
Summary of Contents for Butler Beds
