Spike Bed
10
Wiring Instructions / Wireless Remote
Spike Bed (optional)
•
See parts page 1.5 for more detail.
•
Receiver mounts next to pump inside of
tool box.
•
Green wire (receiver) and the white
wire (hand control) attach to the yellow
coil wire.
•
White wire (receiver) attaches to green
wire (hand control) and connects to the
actuator on motor start solenoid.
•
Red wire (receiver) attaches to orange
fuse wire.
•
Orange fuse wire connects to black
wire (hand control) that connects to the
input on motor start solenoid.
•
Black wire attaches to ground.
•
Yellow, brown and blue wires are not
used and can be bent over and taped to
the cord.
Note: If you are tying this in with the corded
remote (recommended), mate corded and
wireless with a three way adapter as shown
below.
Green and white wires attach to yellow coil
wire.
White wire attaches to green wire that con-
nects to the actuator on motor start solenoid.
Red wire connects to the orange fuse wire.
Orange fuse wire connects to the black wire
and is connected to the input on the motor
start solenoid.
Summary of Contents for Butler Beds
