![background image](http://html1.mh-extra.com/html/harmopool/hydrolyse-ec12/hydrolyse-ec12_manual_600900005.webp)
5
○
It is recommended to put the installation of the water treatment unit in bypass
configuration.
○
Install the water treatment unit on a solid basis.
○
Always keep the product upright. If the product is tilted or laid on the side, the
electrodes cannot measure correctly.
○
The product must be installed inside. If you want to do this outdoors, you need to
contact your, supplier.
○
The dosing device mag shall not be used with hydrochloric acid (HCl)..
○
The electronics (dosing devices) of the appliance must be installed inside. Make sure that
- in case of leak - the water cannot run over the installation.
○
Make sure that the acid container is placed OUTSIDE or in a verywell-fertilizedspace.
○
Calibrate the pH and Rx electrodes for the first use and then "regular". (At least every
3months).
Summary of Contents for Hydrolyse EC12
Page 1: ......