Harmony Folding Travel Booster Car Seat, Instruction Manual

Page: 26 / 63

25
REMOVING/INSTALLING FABRIC SEAT COVER
HEADREST :
1. Locate the snaps (x2) along the top
sides of the headrest; Locate the
plastic hooks (x2) along the top
back of the headrest.
2. Undo snaps (x2) and unhook fabric
from plastic hooks (x2). Remove
fabric headrest cover by gently
sliding fabric off each side of the headrest.
BACKREST :
1. Locate the elastic loops (x4) along
the sides of the backrest.
2. Unhook elastic loops and slide
fabric cover off the backrest.
BASE
:
1. Locate the snaps (x2) at the top of
the seat base (where the backrest
meets the base); Locate the fabric
loops at the back/bottom of the
seat base; And locate the plastic
hooks (x2) at the very front/
bottom of the seat base.
2. Undo snaps (x2), unhook fabric
loops (x2), and unfasten plastic
hooks (x2).
3. Gently slide fabric cover off the
plastic base from the back of the
booster seat towards the front of
the seat.
TO INSTALL
To reinstall fabric pads, repeat
previous steps in reverse order.
TIP : For ease of booster seat BASE pad installation, tilt
the backrest forward slightly to open a gap at base
of backrest to facilitate passing the fabric through
the gap to secure snaps.