3
3. Place the bowl cover onto the bowl then place the motor unit onto the bowl
. T
he
embossment on the bowl cover is linked up to the hole on the motor unit
. L
in
e
up the motor
unit locking tabs to the bowl locking slots till the motor unit
locks.
4. Press and hold the pulse button to process.
Note: This product has a pulse button. Avoid running the motor continuously in this mode
for over 1min. The longer the continuous pulse, the finer the texture. For lightly chopped
foods, use short pulses.
5.
Make
sure the blade stops rotating completely before removing the bowl cover.
Unplug the
unit.
Remove the motor unit and grasp the plastic blade hub.
C
arefully pull the blade
assembly
out. Remove the bowl and empty the
processed food. Do not use bowl for storing
food.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet before cleaning
or maintenance
.
Wash the bowl, blade assembly immediately either using warm/sudsy water or in the
dishwasher. Wipe off the motor unit with a damp cloth
only
- do not immerse in water.
NOTE
: Do not use chemical, steel, or abrasive cleaners to clean the unit
, in order
to
prevent the gloss loss.
HOW TO CHOP OR MINCE FOOD
1. Place the bowl on a counter or other flat surface, then slide the blade down the
shaft in the
bowl. Be careful not to touch the blade as it is extremely sharp.
2. Place food in the bowl, the desired food is mentioned in the chopping guide.
