
A Technical Specifications
Laser Radiation Warning
© 2009 Harmonic Inc.
34
SPL 7110S-Exx, Version 1.0, Rev A
A.9 Laser Radiation Warning
Complies with 21 CFR 1040.10 and 1040 except for deviations pursuant to Laser Notice No.
50, dated June 24, 2007.
WARNING:
CLASS 1M LASER PRODUCT; INVISIBLE LASER RADIATION; DO NOT VIEW DIRECTLY WITH
MAGNIFIER. Viewing the laser output with optical instruments (e.g. magnifier, microscopes) within a
distance of 100mm may pose an eye hazard.
WARNUNG:
KLASSE 1M LASER PRODUKT; UNSICHTBARE LASERSTRAHLUNG; NICHT DIREKT MIT LUPE
BETRACHTEN. Das betrachten des Laser Ausgangs mit optischen Instrumenten (z.B. Vergroeßerunsglas,
Mikroscope) innerhalb eines Abstandes von 100mm kann eine Augenverletungs-Gefahr darstellen.
ATTENTION:
RADIATION LASER INVISIBLE. NE PAS OBSERVER À LA LOUPE DIRECTEMENT. PRODUIT
LASER CLASSE 1M.
L'observation des effets lasers à l'aide d'un appareil optique (comme loupe, microscope…) à une distance
jusqu'à 100 mm peut poser un danger à l'oeil.
When you work with this equipment, take the following precautions:
■
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
■
Never look at an optical fiber using a direct magnification fiber scope without verifying
that all lightwave sources on the fiber are turned off.
■
Never look directly into an optical connector.
■
Install protective covers or caps over connectors when they are not being used.
■
Always assume that exposed optical connectors and cables are energized.
■
Always make an optical power measurement of the fiber or connector before cleaning or
before visual inspection, to ensure that the fiber is not energized