Chapter 4 Electra 9200 Specifications
Optional Features
© 2015 Harmonic Inc. All rights reserved.
28
Electra 9200, Rev O
Optional Features
The encoder can accept up to five optional modules to provide additional functionality.
Highlights of those modules are described in
. Additional information about these
modules can be found in subsequent chapters of this guide.
NOTE:
Optional modules have functionality that is enabled by optional firmware licenses.
Module Options
The following table shows module configurations available for the Electra 9200 and 9200D.
NOTE:
The AHC-561 audio card is being deprecated on the Electra 9200/9200D. IOM-RAC2 and AHC-
RAC are the recommded audio cards for that encoder.
Table 4–2: Optional Features
Feature
Description
Audio Expansion
IOM-RAC2 Audio Module
n
SDI and MPEG-2 inputs
n
16 stereo pairs or eight (plus eight stereo pairs) 5.1
multichannel audio processing
AHC-RAC Audio Module
n
AES and embedded Inputs
n
Three stereo pairs or one 5.1 multichannel of audio processing
AHC-561 Audio Module
n
AES and embedded Inputs
n
Three stereo pairs or one 5.1 multichannel of audio processing
n
Specialized audio processing
Precompressed
(Transport Stream)
Inputs
FLEX Decoder Module -Dual video and audio decoder module
n
Requires one of the following TS input options:
n
Built-in GbE Input OR either:
ASI Input Module
n
Up to four ASI Inputs
8VSB (ATSC) Input Module
n
Up to four RF Inputs
ASI Output Module
n
Dual, redundant ASI outputs
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
FLEX -1
X
X
1 or 2 per chassis
IOM-RAC2
X
X
X
X
1 per chassis
Note: Must use slot 3
AHC-RAC
X
X
X
X
X
1 to 5 per chassis
AHC-561
X
X
X
X
1 to 4 per chassis
Note: Cannot be used with FLEX
8VSB
X
X
X
1 per chassis
ASI Out
X
X
1 per chassis
ASI In
X
X
X
1 per chassis
