Outlander Vehicle Lifts:
Installation & Service Manual
27DEC19 | 630-00133 REV A
17
OUTLANDER VEHICLE LIFTS:
SECTION 4
INSTALLATION
WHEEL CHOCK INSTALLATION
Your lift will be supplied with four adjustable wheel
chocks that, when installed, aid in centering your
mobility device during loading.
1.
Drive your mobility device onto the lift platform,
positioning it as near to the center as possible.
2.
Position the wheel chocks on the platform.
Scooters: Place a wheel chock in front of the
front wheel(s) and in front of the rear wheels or
behind the front wheels and in front of the rear
wheels. Power Chairs: Place a wheel chock in
front of and behind the drive wheels.
3.
Take note of the adjustment holes the wheel
chocks align with on the platform and remove
the chocks.
4.
Remove the mobility device from the lift
platform.
5.
Raise the platform high enough to be able to
install hardware from under it.
6.
Position the wheel chock bottom on the
underside of the platform, aligning it with the
wheel chock top. See Figure 4-16.
Figure 4-16
7.
Secure the wheel chock sections to the platform
using the supplied hardware.
8.
Repeat these steps to install the remaining
wheel chocks to the lift platform.
NOTE: The Outlander TM does not require wheel chock
installation. The platform design supports the mobility
device wheels to that wheel chocks are not required.
Figure 4-17.
Figure 4-17
Wheel Chock Top
Wheel Chock
Bottom
Screws
